Composite Solution
Transparent Casting Resin Solutions
Transparent-resin family selection support for cast decorative and functional parts after review of thickness, colour, mould, inclusions, air release and cure conditions.
Application Scope
Transparent casting performance depends on part geometry and thickness, colour target, mould and inclusions. Mixing, air release, ambient conditions and the cure cycle also need to be considered together. A reference image shows appearance; clarity, bubble level and yellowing need supporting product and process information.
SIHE reviews representative product and process information before identifying a candidate delivery grade and trial direction.
Typical Products and Production Scenarios
Typical finished products
- Transparent decorative castings and craft parts
- Jewellery and accessory components
- Clear or coloured moulded pieces
- Representative cast samples containing approved decorative inclusions
Production scenarios
- Small and medium transparent casting trials
- Colour, inclusion and mould-compatibility evaluation
- Review of bubbles, haze, exotherm, cracking or surface problems
Application and process reference
Common Production Goals and Challenges
- Evaluating the required clarity and colour against an agreed sample
- Reducing bubbles, haze and visible surface defects through process review
- Managing cure exotherm across the intended casting thickness
- Matching working, gel and demoulding windows to the mould and part
- Meeting the required grinding, polishing or post-casting finish
Information Needed for Material Selection
- Finished-product type
- Single-pour dimensions and thickness
- Target clarity
- Target colour
- Fillers, decorative inclusions or embedded objects
- Acceptable bubble and surface criteria
- Mould type and mould material
- Cure temperature and time, current yellowing, bubble, cracking or peak-temperature problem, and estimated demand
Material Requirements
- Clarity and base-colour direction assessed against an agreed target sample
- Flow and air-release behaviour suited to the mould and casting method
- A cure window reviewed for part geometry, thickness and ambient conditions
- Compatibility with pigments, approved inclusions, additives and mould materials after trials
- Surface and post-finishing behaviour evaluated with representative parts
Recommended SIHE Products
SIHE Transparent Resin Series
Unsaturated polyester resin for transparent crafts, imitation-jade products and transparent sanitary ware.
- Why consider this product
- The current SIHE transparent-resin family is the public starting point for clear and coloured cast parts where thickness, colour, air release and cure conditions must be reviewed together.
- Confirm before selection
- Confirm part geometry and thickness, target sample, pigment or inclusion system, mould, mixing and air-release method, cure conditions, expected finish and representative trial criteria.
This product entry represents a resin family rather than one fixed formulation. The listed grades and typical parameters support preliminary selection. SIHE confirms the actual delivery grade according to the application and production process.
How SIHE Supports Material Selection
Share the finished-product, application and production-process requirements.
SIHE reviews the production conditions, current materials and reported problems.
SIHE identifies candidate product families or grades for representative evaluation.
Quotation, sample and document availability are confirmed according to the reviewed request.
The automatic acknowledgement only confirms that the RFQ was saved. It is not a quotation, sample approval, inventory or delivery confirmation, or a final technical conclusion. Product and delivery-grade selection is confirmed by a SIHE representative after review.
Technical Documents and Samples
Controlled technical documents
General product information may be shown publicly. Current TDS documents are supplied through a controlled request, while SDS availability is reviewed for the selected product and market of use. SIHE does not promise that every grade has a current document in every requested language.
Manual sample review
Every sample request is reviewed manually. Availability, sample size, charges and shipping method are confirmed against the product, application, test plan, estimated demand and destination.
Share Your Application Requirements with SIHE
Tell us about your finished product, production process, current materials, target properties and estimated demand. SIHE will review the information before recommending a product family or delivery grade.